ITO vs FTO Glass: Sheet Resistance, Transmission and Process Requirements
Choose ITO or FTO against the electrical, optical, surface and processing requirements of the experiment. A coating name or resistance value alone is insufficient. The comparison below helps prepare an acceptance specification; it does not establish the performance of a particular supplied product.
Pre-quotation checklist
| Requirement | ITO glass inquiry | FTO glass inquiry |
|---|---|---|
| Coating definition | Indium tin oxide (ITO); coated face and pattern | Fluorine-doped tin oxide (FTO); coated face and pattern |
| Sheet resistance | Target/tolerance or maximum value in Ω/sq | Target/tolerance or maximum value in Ω/sq |
| Optical transmission | Wavelength or spectral range; does the value include glass? | Compare at the same wavelength and reference conditions |
| Surface and pattern | Roughness measurement conditions and drawing, if required | Roughness measurement conditions and drawing, if required |
| Heat treatment | Temperature, duration, atmosphere and post-treatment criteria | Confirm product suitability for the same process conditions |
| Glass and cut size | Glass type, length × width, thickness and tolerances | Glass type, length × width, thickness and tolerances |
Distinguish a resistance target from a maximum
A request for “30 Ω/sq” does not define its tolerance. State lower and upper limits if the experiment requires a range. Specify a maximum if that is the actual acceptance rule. Do not assume that a lower measured resistance is acceptable for every application.
Compare transmission under matching conditions
An average visible transmission does not define transmission at the wavelength used in your experiment. Give the relevant wavelengths and minimum values. Clarify whether the result covers the complete coated substrate or the coating, and request a spectral curve when needed.
Confirm thermal and chemical suitability for the product
Do not assign a universal temperature rating from the coating name. Share the treatment temperature, dwell time, atmosphere, cleaning process and contacting chemicals. If resistance or optical properties must remain within limits afterward, state those post-treatment criteria separately.
What can remain open at the inquiry stage?
If substrate type or patterning has not been selected, describe the application and request a recommendation. Separate essential dimensions, quantities and performance limits from preferences. Adesis confirms the offered product specification and documentation scope during quotation.
Copyable RFQ specification template
Complete the fields relevant to your experiment; mark unknowns as “technical recommendation requested”. Paste the text into the RFQ technical notes and attach drawings or specifications separately.
Product: ITO / FTO coated glass Cut size and tolerance (mm): Glass type and thickness (mm): Coated face / pattern drawing: Sheet resistance and acceptance range (Ω/sq): Transmission requirement and wavelengths: Heat treatment: temperature / duration / atmosphere: Chemical exposure / cleaning: Post-treatment acceptance criteria: Quantity and delivery country: Required measurement documents: